CATEGORIES
- Test Probe,Test Finger,Test Pin
- Plug and Receptacles Gauge
- Lamp Caps Gauge
- Flammability Testing Instrument
- Spring Hammer Test Equipment
- Ingress Protection Tester
- Electrical Safety Test Equipment
- Safety Testing Electrical Device
- Lampholders Gauge
- LED Lamps Tester
- Withstand Voltage Tester
- Irradiance Meter
- Weighing Sensor
- Instrument Accessories
- Other Test Equipment
Latest news
- Drain Holes and Vent Membranes: The Two Paths Water Uses After the Test
- Seal Compression Set: Why an IP Rating Ages Even When Nothing Has Worn
- IPX4 Oscillating Tube: Hole Diameter, Flow per Hole and Why Both Matter
- Calibrating the Nozzle, Not the Pump: Flow, Pressure and the 5 % That Gets Audited
- Talcum Dust Chamber: 2 kg per Cubic Metre, 8 Hours, and the Vacuum That Decides the Grade
- IPX6 Hose Jet: 100 Litres a Minute, 100 kPa, and the Water Supply Nobody Sizes
Contact us
- ADD: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
- TEL: +86-755-33168386
- FAX: +86-755-61605199
- E-mail: sales@china-gauges.com
Tags
E14 Holder for Torque Test on Lamps with Screw Caps of IEC 60432-1 Fig. C.2
- Measurement & Analysis Instruments > Safety Instrument
- Include ISO 17025 CNAS & ILAC Test Report
- Item No.: LX-E14NH
- Made in China
- Product description: Holder for torsion Test on Lamps with Screw Caps.
PRODUCT INTRODUCTION
Objective: To detect the lamp holder of mechanical strength.
Torsion resistance
The cap shall remain firmly attached to the bulb or that part of the lamp which is used for screwing the lamp in or out when subjected to the torque levels listed below.
E14................................................ 1,15 Nm
The test is made by means of the test holders shown in IEC 60432-1 figures C.2.
HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test and measuring equipment for products testing as per international norms and offering calibration services and related information. Our products and services are used by research & development establishments, test laboratories, defense establishments, government institutions & manufacturing industries to fulfill the clients' requirements.
Main Products: go no go gauges, ip tester, test probe Kit, Impact test equipment, Test Probes, Spring Hammer, IEC 61032 test finger, Plugs and Socket Outlet Gauge, AC Hipot Tester, iec test probe, ul test probe, Material Flammability Tester, IP Code Tester, Impact Test Apparatus, Security Testing Machine, Lamp Cap Gauge Tester, lampholders gauge Tester, Plug & Socket Tester, Electrical Safety Tester, LED Test Instruments, Environmental Test Equipment, Instrument Accessories, Weighing Sensor and More.
If you require equipment to test products such as home appliances, electrical accessories like switches, sockets, connectors, etc. industrial & road lighting luminaires, automobile lighting systems or related categories, we can provide the solutions you need.
We would appreciate your comments on the layout design, presentation or other aspects of our website.
Website: https://www.work-phone.net
Contacts: Eason Wang
E-mail: sales@china-gauges.com
TEL: +86-755-33168386
FAX: +86-755-61605199
Phone: +86-13751010017
Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
ZIP: 518102
Website: https://www.iec-equipment.com/






